Articles about "Tank Regulations"

blog image

Australian Plumbing Requirements and Standards for Installing Rainwater Tanks

June 15, 2018
Water authorities in Australia are tasked with delivering high-quality water that is safe to drink and use in cooking. To ensure water safety, property owners need to comply with certain requirements and stands when installing or plumbing in alternative water supplies like rainwater tanks. This article examines general requirements and standards when plumbing in a […]
blog image

Building Sustainability (BASIX) and Rainwater System Requirements in NSW

June 15, 2018
New South Wales’ Building and Sustainability Index (BASIX) aims to achieve up to a 40% reduction on the consumption of potable water against the state benchmark. This benchmark is explicitly expressed as being equal to 90,340 litres of water per person per year. BASIX assessment is required for: new buildings that consist of one or more dwellings conversions of […]
blog image

NSW Development Code for Rainwater Tank Installations

June 15, 2018
When installing a water tank you need to make sure that all the work is conducted in accordance with state government specifications and requirements. This article was written for tank installers to understand the regulations in New South Wales for rainwater tanks installed above ground and below ground, and the associated plumbing requirements. Note: When working in NSW […]
blog image

Installing a Water Tank in South Australia: Planning, Plumbing and Protection

June 15, 2018
The South Australian Government has introduced a number of initiatives, especially in recent years, with the purpose of encouraging and ensuring more sustainable water use in the State. One of these initiatives is the requirement for mandatory water tanks, which requires a rainwater tank and rainfall harvesting system to be set in place. However, the compliance with this […]
blog image

Installing Backflow Prevention Devices for Plumbed-in Rainwater Tanks

June 15, 2018
When plumbing in a rainwater tank, a typical setup is to connect mains water to it as a backup water supply. When your tank runs dry, a rainwater to mains water switch can flip over to your mains water so that toilets and washing can continue without issue. Connecting to your mains water supply means a licensed […]
blog image

Quick Guide to Victoria Rainwater Tank Installation Regulations

June 15, 2018
When installing a water tank, you need to make sure that all the work is conducted in accordance with state government specifications and requirements. In this article, we will look at regulations in the state of Victoria associated with rainwater tanks including general requirements, installation requirements and requirements often required by local authorities. Install Requirements for […]
blog image

Why State Government and Councils Require Water Tank Screening

June 15, 2018
In Australia, states require you to screen all entry points to on your rainwater tank. In Queensland, local councils may fine you several hundred dollars for failing to screen your tank. South Australian government advise when planning for rainwater use, the inlet and overflow of the rainwater tank must be fitted with mosquito proof, non-degradable screens […]
blog image

Stormwater Detention: Council Requirements for Residential and Property Development

June 15, 2018
Local councils require stormwater detention for residential development throughout many built-up areas in Australia. This article will look at why this is necessary in developed areas, general requirements you might need to meet, and how you can comply with water detention requirements. What is Stormwater Detention? As the number of residential homes increase and areas […]